Every inch of this studio is at this moment filled with framed paintings. Yesterday I finished the last of them and wrapped them up for travel as I went along. There has been a bumpy learning curve over the last decade as I tried several different ways of securing the paintings for long distance transport.
One memorable year, when I still had my old Toyota pickup, circa 1982, I decided to stack the framed paintings horizontally…one on top of the other…with sheets of matboard and cardboard in between. After the 12 hour drive to Martha’s Vineyard, in steamy summer heat, I was dismayed to discover that some of the cardboard sheets had wilted and sagged enough to touch the surface of the paintings and actually “etch” a faint series of lines into the varnish. A hectic and sweaty few hours ensued wherein I had to transport them to a garage large enough to lay them out and then unframe and revarnish. NOT something an artist wants to have to do the day before a big show !!!
But, as I said, memorable and lesson securely learned. Nothing, absolutely NOTHING ever touches the surfaces of the paintings again. Now think about that. When they are framed, the frames provide a measure of protection by standing proud above the surface of the panels. Some are deeper than others but all of them give a bit of room for air to circulate when a board is placed on top or between frames.
But remember the sagging ordeal. Even a rigid foamcore board can bow enough in the heat and humidity to touch the surface even when packed upright. So I have sheets of ultra thin plywood which are wrapped in cotton sheeting in the trailer. They provide a rigid barrier in between the largest of the paintings and will not warp under stress.
So I have evolved to the current packing method which involved cutting foamcore corners and wrapping clear plastic packing film around the frames only. The plastic can touch the frame but usually stretches tight and doesn’t but either way it won’t leave a mark and lots of air can circulate around it. This makes it easier to handle the frames as they go in and out of the trailer.
Pat’s coming over later to help me wrap the two largest ones but in the meantime here’s a look at the finished carved frame which I showed you in progress a few days ago…
And because I spent most of yesterday working in the studio kitchen…
today’s painting is of one corner of that very room…
#13 – Swept Away 18 x 26
